A strip for every display and every Space
Each display has its own strip, with its own focused window and scroll position. Within a display, each macOS Space (desktop) has its own strip too. ChainYourMac uses macOS's Spaces as they are, so Mission Control, ⌃← / ⌃→ and the Spaces bar keep working.
For this to work, System Settings › Desktop & Dock › Displays have separate Spaces must be on (changing it needs a log-out). The Mac Setup screen checks it.
Moving windows between displays
- ⌃⌥N sends the focused window to the next display, skipping any display ChainYourMac is switched off for.
- Drag a window to another display and it joins that display's strip.
Leave a display alone
In Configuration › Displays, switch off Manage windows on … for any display. Its windows stay exactly where you put them, and dragging a window onto it takes that window out of the strip. ChainYourMac remembers the choice while the display is unplugged, and the Forget button clears it.
A common setup: the strip on a big external display, and the laptop screen arranged by hand for chat and music.
Display edges
With displays side by side, a window that would hang over onto the next screen snaps flush to the edge instead. Windows scrolled out of view on a display's inner edge hide rather than spill onto the other screen, leaving only a one-point sliver in a bottom corner. If that edge feels crowded, arranging the displays one above the other in System Settings › Displays avoids it; Mac Setup suggests this.
Windows on all desktops
A window assigned to every desktop (right-click its Dock icon › Options › Assign To › All Desktops) belongs to the strip of whichever desktop you're looking at.
Sleep, wake and unplugging
- ChainYourMac sets itself up again after sleep, the lock screen or displays waking, with no restart needed.
- Each monitor gets its own windows back, with columns, stacks and tabs as they were, even when one display wakes later than the other.
- Unplug a monitor and its windows move to a remaining display intact.
Full-screen apps
Windows in macOS full screen (the green button) live on their own Space, and ChainYourMac leaves them alone. For a column as wide as the screen that stays on the strip, use ⌃⌥F.
FAQ
Does ChainYourMac work with two monitors?
Yes. Each display gets its own strip with its own focus and scroll position. ⌃⌥N sends the focused window to the next display, and dragging a window to another display makes it join that display's strip.
Can I use ChainYourMac on one monitor only?
Yes. In Configuration › Displays, switch off "Manage windows on" for any display. Windows there stay exactly where you put them. The setting is remembered while the display is unplugged.
Does it work with macOS Spaces (desktops)?
Yes. Every Space gets its own strip. ChainYourMac uses macOS's own Spaces rather than adding workspaces of its own, so Mission Control and ⌃← / ⌃→ keep working.